ChAFTA Certificate of Origin for China-Made Building Products: What an Australian Importer Needs to Hold

Container terminal handling a project import from China, illustrating who clears customs
Blog,Shipping & Delivery Guide

A quotation for building products from China, delivered to Australia, may carry a duty line that assumes a China–Australia Free Trade Agreement (ChAFTA) preferential rate. That rate does not follow from the words “Made in China”. The Department of Foreign Affairs and Trade (DFAT) says that only goods that “originate” in Australia or China are eligible, and that goods which do not meet the rules of origin are subject to the general (most-favoured-nation, MFN) rate of duty instead. Whether the goods originate is shown by origin evidence, and the importer is the one who has to be able to produce it.

This article sets out, from DFAT’s ChAFTA guide and two Australian Border Force (ABF) customs notices, what that evidence is, how long it lasts, what happens if you do not have it at entry, and what to ask the factory before you place the order. Everything below was read on 18 November 2026. The ABF notices are dated 2015 and 2018 and DFAT’s guide tells readers to check the importing customs authority for up-to-date information, so confirm the current position with ABF or a customs broker before you rely on it. We did not read the Australian tariff schedule, so this article gives no duty rate for any product. For the wider picture across several countries, see our article on certificates of origin and import duty for project buyers.

What “Originating” Means Under ChAFTA

DFAT’s guide to using ChAFTA to export or import describes three routes by which a good counts as originating: it is wholly obtained in China or Australia; it is wholly produced in China or Australia, or both, from materials that are themselves originating; or it is produced using inputs from other countries and meets the Product Specific Rule (PSR) that applies to it in Chapter 3, Annex II of the agreement. DFAT says wholly obtained goods are typically agricultural goods and natural resources, and that a good containing inputs from outside Australia or China must be checked against the PSR for that good.

DFAT says most PSRs use a change in tariff classification (CTC): any non-originating inputs must change in the first two digits (change in chapter), four digits (heading) or six digits (subheading) of the HS code once they become part of the finished good. Its example of a change-in-chapter rule is importing steel from HS Chapter 72 and making hand-operated spanners or wrenches under HS 8204. Some PSRs set a regional value content (RVC) test instead, or as well, which requires originating materials and processes to account for a stated share of the final value. Where non-originating inputs fail the required change in classification, the good can still qualify under a de minimis rule if the value of all non-originating materials does not exceed 10 per cent of the value of the good and the other requirements are met. Simple processes such as packaging, simple grinding or washing do not confer origin.

Which PSR applies depends on the HS code of the finished product, and PSRs are listed at chapter, heading or subheading level. We have not looked up the PSR for any building product, so we cannot say which products qualify. DFAT points readers to its FTA Portal, which it says shows tariff rates and whether a product is likely to meet the rules of origin, and it recommends a professional customs broker or freight forwarder to confirm the tariff code.

Certificate of Origin or Declaration of Origin

DFAT says goods seeking ChAFTA preferential treatment must be accompanied by documentation, either a certificate of origin (CoO) or a declaration of origin (DoO). The two work differently:

  • Certificate of origin. It is issued by an authorised body in the country of origin and may need to be provided, on request, to customs officials in the importing country. DFAT lists China’s authorised bodies for goods coming to Australia as the China Customs Service (GACC) and the China Council for the Promotion of International Trade (CCPIT). A CoO applies to a single shipment, may cover one or more goods but not more than 20 unique goods, and may be valid for up to one year.
  • Declaration of origin. It is completed by the exporter or producer on the template in Annex 3-B of ChAFTA, with no approval by an authorised body. DFAT says a DoO may be accepted in place of a CoO for goods covered by an advance ruling on ChAFTA origin. It also applies to a single shipment, may cover up to 20 items and remains valid for one year. The template has a column for the reference number of the advance ruling, and the declaration is printed and presented as a separate document accompanying the commercial invoice.

DFAT says that importers into Australia who want an advance ruling should contact the Australian Border Force. Because the declaration depends on that ruling, raise it before the order rather than on the day of shipment.

Check the issuing stamp. ABF Customs Notice 2018/30 says that from 20 August 2018 the GACC issues ChAFTA certificates in place of the former Chinese quality authority (AQSIQ), that the stamp in box 14 is now issued by one of the GACC’s 42 customs districts and the name GACC will not appear on it, and that certificates issued by AQSIQ before that date stay effective for their period of validity. It adds that CCPIT certificates are unchanged and remain valid, and that importers with a concern about a stamp can send a copy of the certificate to ABF’s Origin and Verification Team to be told whether it can be used to claim the preference.

When No Certificate Is Needed

DFAT states that a CoO or DoO will not always be required and that neither country requires one where the total customs value of the goods is less than AUD 1,000 (for Australia) or RMB 6,000 (for China). It adds that ChAFTA allows both countries to raise the threshold and that readers should check with the importing customs authority for up-to-date information. We did not check the current figure with ABF.

Holding, Claiming and Keeping the Evidence

From the DFAT guide, the points an importer into Australia needs to plan for:

  • Holding it. DFAT describes the certificate as something the importer may be asked to provide to the importing customs authority. ABF Customs Notice 2015/41 says that for goods wholly obtained in China the importer must have a CoO or DoO, or a copy, at the time the goods are imported.
  • Verification. Customs authorities may verify a CoO or DoO by requesting information from the authorised body, the importer, the exporter or the producer, from the exporting customs authority, or by asking for a verification visit to the premises of the exporter or producer.
  • Records. DFAT says exporters or importers into Australia should note that records must be retained for five years, in hard copy or electronic form.
  • Claiming afterwards. DFAT says importers may claim preferential treatment after importation if they did not claim at entry. For imports into Australia, refunds can be claimed for up to 12 months of the date of shipment where the certificate of origin is issued retrospectively, and up to four years where a certificate of origin was held at the time of importation.

The last point is the one to put in the purchase terms. A certificate that is issued only after the goods have shipped still leaves a route to a refund, but on a shorter clock than a certificate that existed at entry.

Sourcing this for a commercial project?

FBM Sourcing manages the entire China procurement package for overseas construction projects. We work with Developers · General Contractors · Builders · Commercial Project Owners · Interior Design & Construction Companies · FF&E Solution Providers. Send your BOQ, drawings or product schedule for review.

See our China procurement support

Get a Project Quote WhatsApp +86 135 6007 5057

What a Preference Does Not Replace

DFAT notes that the rules of origin do not replace other import requirements such as import licences and biosecurity approvals. ABF Customs Notice 2015/41 says that even where Chinese originating goods are eligible for “Free” rates of customs duty, other duties and taxes, such as goods and services tax, dumping and countervailing duties and other taxes and levies including cost recovery charges, will still be payable if they are relevant. We did not read any current rate or any anti-dumping measure.

DFAT also says the “base rate” in the ChAFTA schedule is the tariff that applied in 2013 and that each country can reduce its own tariff separately at any time, so traders should assess whether it is more advantageous to import under the ChAFTA preference or at the current MFN applied rate. Put the two side by side for each HS code, rather than assuming the preference is the cheaper route.

What to Ask the Factory Before You Place the Order

Turning the DFAT and ABF text into questions you can put in writing at the quotation stage:

  • Which HS code is each quoted line classified under? DFAT’s declaration template asks for the HS code to six digits, and DFAT says tariff codes beyond six digits are not comparable between countries, so agree the code with your customs broker.
  • Which origin route does the factory expect each line to meet: wholly obtained, wholly produced from originating materials, or a PSR? If the answer is a PSR, ask which non-originating inputs the product contains and where they come from.
  • Which body will issue the certificate, GACC or CCPIT, and will it be issued before shipment? If it can only be issued afterwards, note the 12-month refund window above.
  • Will the factory complete a declaration of origin instead? If so, ask whether an advance ruling exists for the product and what its reference number is, because DFAT ties the declaration to an advance ruling.
  • How many distinct goods are on the shipment? One certificate covers no more than 20 unique goods and one shipment, so a package with many product lines needs the number of certificates agreed early.
  • Ask for a copy of the certificate before the goods arrive, so that you or your broker can check the stamp against ABF Notice 2018/30 and the description and HS code against the commercial invoice.

Our articles on shipping and customs documents for a China project order, HS codes for furniture and building materials and who clears customs on a project import cover the rest of the import paperwork.

What FBM Sourcing’s Guide Says About Customs and Delivery

FBM Sourcing’s client guide says that customs clearance and inland transportation at the destination are handled by the customer, unless FBM Sourcing quotes DDP (delivered duty paid), with quotations EXW as standard and C&F to your port on request. It does not mention ChAFTA, so this article makes no claim about what FBM Sourcing does with origin documents. On inspection, the guide says FBM Sourcing’s own QC team checks the goods against the signed-off specification before shipment and that your own project team is welcome to attend. That inspection does not test where a product originates, so the origin questions above belong in the quotation stage.

What This Article Does Not Cover

  • The duty rate, HS code or product specific rule for any building product, or which products qualify. We did not read the Australian tariff schedule or Annex II.
  • Goods and services tax, anti-dumping measures, import licences and biosecurity conditions, beyond the fact that they remain separate.
  • The ABF Rules of Origin Instruction and Guideline (2015 edition), which we did not rely on because it may have been replaced.
  • Other agreements, including the Regional Comprehensive Economic Partnership Agreement, and imports into other countries.
  • Everything attributed to DFAT and ABF is as read on 18 November 2026, and the notices date from 2015 and 2018; confirm the current rules with ABF or a customs broker.

Questions About ChAFTA Origin Paperwork for Australian Importers

Does a “Made in China” label qualify goods for the ChAFTA rate?

No. DFAT says only goods that originate in China or Australia under the agreement’s rules of origin are eligible for preferential treatment, and that goods which do not meet the rules are subject to the general MFN rate of duty.

What origin document does an Australian importer need for ChAFTA?

DFAT says goods seeking preferential treatment must be accompanied by either a certificate of origin, issued by an authorised body in China (GACC or CCPIT), or a declaration of origin completed by the exporter or producer, which DFAT says may be accepted in place of a certificate for goods covered by an advance ruling.

How long is a ChAFTA certificate of origin valid?

DFAT says a certificate of origin applies to a single shipment, covers no more than 20 unique goods and may be valid for up to one year. A declaration of origin has the same single-shipment and 20-item limits and remains valid for one year.

Is a certificate needed for a small shipment?

DFAT says neither Australia nor China requires a certificate or declaration where the total customs value is below AUD 1,000 or RMB 6,000, and tells readers to check the importing customs authority for up-to-date information on the threshold.

Can the preference be claimed after the goods arrive?

DFAT says yes. For imports into Australia, refunds can be claimed for up to 12 months of the date of shipment where the certificate is issued retrospectively, and up to four years where a certificate was held at the time of importation.

How long must an importer keep origin records?

DFAT says exporters or importers into Australia should note that records must be retained for five years, in hard copy or electronic form.

How does FBM Sourcing charge for this?

For suppliers you nominate, we charge a 5% commission; for products we source for you, we quote a direct price. Our own team performs one inspection after bulk production is complete and before shipment, and the client’s project team is welcome to attend.

FBM Sourcing manages the entire China procurement package for overseas construction projects. We work with Developers · General Contractors · Builders · Commercial Project Owners · Interior Design & Construction Companies · FF&E Solution Providers.

Share This :

Need Help With Your Project?

We coordinate suppliers, production, inspection, and shipping for construction projects worldwide.

Blog Categories

Tell us about your project

Since 2014, FBM Sourcing has managed China procurement for overseas construction projects — building materials and FF&E, from sourcing to after-sales.