BHMA Certified Door Hardware: What the Mark Covers and How to Check a Factory’s Claim

Stainless steel commercial door hardware close-up representing China door and window hardware manufacturers
Blog,Procurement Process Guide

A quotation for door hardware often says “to ANSI/BHMA A156” or “BHMA Certified”. Those are two different statements. One names a performance standard; the other says a specific product has gone through a certification programme and is listed in a directory. This article sets out what BHMA itself says about each, how its product numbers, grades and finish codes work, and what to ask a factory to show before you accept either claim in a quotation.

Everything attributed to BHMA below was read on its own website on 16 November 2026: the ANSI/BHMA Standards, Hardware Highlights, Certification Program, Certified Products Directory, Labeling Compliance, Frequently Asked Questions, Product Numbering, Finish Code Lookup and Codes In Context pages. We did not read any ANSI/BHMA standard itself, so the article says nothing about test methods or pass levels inside a standard.

What BHMA Says the A156 Series Is

On its ANSI/BHMA Standards page, the Builders Hardware Manufacturers Association (BHMA) says it is the only organization accredited by the American National Standards Institute (ANSI) to develop and maintain performance standards for locks, closers, exit devices and other builders hardware. It says it has more than 40 ANSI/BHMA standards, and that the A156 series “describes and establishes features and criteria” for products including locks, closers, exit devices, butts, hinges, power-operated doors and access control products.

BHMA’s Hardware Highlights page lists the series with each standard’s year as of the date we read it. A few of the ones a door schedule most often points to: A156.1 (2025) Butts and Hinges, A156.2 (2022) Locks and Latches, A156.3 (2025) Exit Devices, A156.4 (2024) Door Closers and Pivots, A156.13 (2022) Mortise Locks, A156.18 (2020) Materials and Finishes and A156.21 (2025) Thresholds. BHMA says it publishes a one-page summary for each standard and sells the full standards. Because the year changes when a standard is revised, a schedule that says only “A156.2” leaves open which edition is meant.

A Standard Is Not a Certification

BHMA’s Certification Program page describes a separate, voluntary step. Participants submit a hardware product to laboratory testing to confirm that it fully meets the criteria of its ANSI/BHMA standard. It adds that in-factory audits are coordinated periodically, that products unable to pass the auditing process face loss of certification, and that a manufacturer does not need to be a BHMA member to certify its products.

The Certified Products Directory page adds that the tests cover cycle, operational, strength, security and finish performance requirements, and that certified products undergo periodic recertification. Read together, the pages draw a clear line: a product can be described as made “to” a standard without being a BHMA Certified product, because certification is something a manufacturer chooses to apply for. A quotation that says only “to ANSI/BHMA” is therefore a statement about the specification, not about whether this product has been certified.

How to Check a “BHMA Certified” Claim

BHMA’s Labeling Compliance page says that products legitimately certified by BHMA will always be listed in its Certified Products Directory (CPD). It also says some of the most frequent misuse claims it receives involve certified-product branding being falsely displayed, or vague language and soft phrases used to imply a product is BHMA Certified without saying so directly. The CPD page says the directory can be searched by ANSI standard or by brand, and, at the time we read it, that the directory was moving to a new searchable platform alongside an outgoing PDF-based version, so a complete list for one standard might need both to be searched.

Turning that into a check you can run on a quotation:

  • Find the exact wording. “BHMA Certified” is a specific claim; “tested to BHMA standards”, “BHMA grade” or “meets A156” are not the same thing.
  • Ask for the brand and model that carries the certification, then look the standard and brand up in the CPD yourself. The model in the directory has to be the model in the quotation.
  • Ask which standard and edition each hardware item is certified to (for example the A156 number and year), and compare it with the standard written in your schedule.
  • BHMA’s FAQ says certified products should carry the certification logo on the product or its packaging. Add the mark to the list of things to look for on the samples and on the delivered goods.
  • If the factory’s answer is a general statement about its quality system or a certificate for a different product, treat the claim as not yet shown.

Reading a BHMA Product Number, Grade and Finish Code

BHMA’s Product Numbering page and FAQ explain that every product can be identified by a five-digit number preceded by a prefix letter, and that each standard explains the numbering for its own category. BHMA’s worked example is the cabinet-hardware number B 5 2 13 1, read in the A156.9 standard as a Grade 1, back-mounted stainless steel cabinet knob. BHMA says many items come in Grade 1, 2 or 3, with Grade 1 the highest, that grading criteria are product-specific and set out in the applicable standard, and that building hardware should always be specified by BHMA product number to avoid confusion over brand names, performance standards or grade.

Finishes work differently. According to BHMA’s Finish Code Lookup page, a finish is included in the A156.18 Materials and Finishes standard only if at least three manufacturers produce it, and it is then assigned a number starting at 600. Numbers 001 to 599 are reserved for individual manufacturers’ own finishes, and code 000 is reserved for a manufacturer’s custom finish, which typically has no visual equivalent to a previously assigned BHMA code. So a finish written as a number in the 001–599 range, or as 000, is not a standard BHMA finish, and it needs a description and a sample to be compared like for like. For the fields a door hardware schedule needs, including grade and finish, see what to put in a door hardware schedule before a China quotation.

Sourcing this for a commercial project?

FBM Sourcing manages the entire China procurement package for overseas construction projects. We work with Developers · General Contractors · Builders · Commercial Project Owners · Interior Design & Construction Companies · FF&E Solution Providers. Send your BOQ, drawings or product schedule for review.

See our China procurement support

Get a Project Quote WhatsApp +86 135 6007 5057

What a BHMA Certificate Does Not Settle

The BHMA pages describe certification against the performance criteria of an ANSI/BHMA standard. They do not say that certification covers a door assembly’s fire rating, a code listing for an electrical component, or the destination market’s approvals. BHMA’s own Codes In Context page treats code topics separately: among its 2024 IBC and IFC items, it lists requirements for electrical locks in some types of systems to be listed to UL 294 or UL 1034. Whether a BHMA certificate, a listing or both are needed on your project is set by your specification and the authority for your location, not by this article.

The same separation applies to other evidence. Factory test reports and accredited lab testing covers what different kinds of report prove, test reports and certificates before a China quotation covers what to tell a sourcing agent up front, and ICC-ES evaluation reports are a different scheme again.

What FBM Sourcing’s Guide Says About Certifications, Quotations and Inspection

FBM Sourcing’s client guide says that in its main markets of North America and Australia every product must meet local codes, so the first step in choosing a factory is checking that it holds the test reports or certifications for that specific product, “confirmed before we quote”. The guide’s examples are NFRC, Florida hurricane approvals and AS 2047 for aluminium windows and doors, cUPC and WaterMark for sanitary ware, and UL for fire-rated steel and wood doors and for solar systems. It does not name BHMA, so this article claims nothing about FBM Sourcing sourcing BHMA Certified hardware.

On quotations, the guide says each line gives the item, specification, materials and finish, dimensions, unit price, quantity, packing and lead time, quoted like-for-like against your specification, with any substitution flagged on the line. On inspection, it says FBM Sourcing’s own QC team checks quantities, dimensions, finish, hardware (including markings on branded hardware) and packing against the signed-off specification before shipment, that you receive the report with photos and video, and that your own project team is welcome to attend. If your schedule asks for a certified product, the mark is one of the things that check can be written against; it does not turn the inspection into a certification.

What This Article Does Not Cover

  • The content of any ANSI/BHMA standard, including test methods, cycle counts and grade thresholds. We did not read the standards.
  • Which hardware a given project, code or authority requires to be BHMA Certified or listed.
  • Any specific brand, model or CPD entry, or whether any particular factory’s products are certified.
  • The cost or timing of certification.
  • Everything attributed to BHMA is as read on 16 November 2026 and can change; the CPD in particular was in a transition between platforms when we read it.

Questions About BHMA Certified Hardware

What does BHMA Certified mean?

BHMA’s Certification Program page says participants voluntarily submit a hardware product to laboratory testing to confirm it fully meets the criteria of its ANSI/BHMA standard, with periodic in-factory audits, and that products unable to pass the auditing process face loss of certification.

Is “tested to ANSI/BHMA A156” the same as BHMA Certified?

No. The A156 series is a set of performance standards. Certification is a separate, voluntary programme for a specific product, and BHMA says certified products are listed in its Certified Products Directory.

How do I check whether a hardware product is BHMA Certified?

BHMA says legitimately certified products are always listed in its Certified Products Directory, which can be searched by ANSI standard or by brand. Check that the brand and model in the directory match the model in your quotation.

Does a manufacturer have to be a BHMA member to certify its products?

No. BHMA’s pages say the certification programme does not require the manufacturer to be a BHMA member.

What do the five digits in a BHMA product number mean?

BHMA says the number is a prefix letter plus five digits, and that each ANSI/BHMA standard explains the code for its own category. In its example, B 5 2 13 1 under A156.9 is a Grade 1, back-mounted stainless steel cabinet knob: base material, product type, function and grade.

What is a BHMA finish code, and what if my finish number is below 600?

Finish codes in the A156.18 standard start at 600. BHMA says 001 to 599 are reserved for individual manufacturers’ own finishes and 000 for custom finishes, so a finish in those ranges is not a standard BHMA finish and should be described and sampled.

How does FBM Sourcing charge for this?

For suppliers you nominate, we charge a 5% commission; for products we source for you, we quote a direct price. Our own team performs one inspection after bulk production is complete and before shipment, and the client’s project team is welcome to attend.

FBM Sourcing manages the entire China procurement package for overseas construction projects. We work with Developers · General Contractors · Builders · Commercial Project Owners · Interior Design & Construction Companies · FF&E Solution Providers.

Share This :

Need Help With Your Project?

We coordinate suppliers, production, inspection, and shipping for construction projects worldwide.

Blog Categories

Tell us about your project

Since 2014, FBM Sourcing has managed China procurement for overseas construction projects — building materials and FF&E, from sourcing to after-sales.